my paradise blog
Wednesday, 19 March 2014
Make pen drive bootable without any software
For windows7 users:
Go to “Start” button and click. Write “cmd” then cmd icon will appear on the top of the panel. (Fig.1)
“Right click” on the cmd icon and click “Run as administrator”. (Fig.2)
It will open the command prompt. (Fig.3)
For windows 8 users:
Press “Windows key” and press “c”. You will see the command prompt icon. “Right click” on the command prompt icon and click “Run as administrator” from the bottom bar. (Fig.4)
It will open the command prompt like in Fig.3
Now following steps are same for the windows7 and 8 OS.
Type “diskpart” inside the command prompt and hit “ENTER”. (Fig.5)
It will good before going to next step that you should disconnect all other external hard disk, flash/pen drive etc. because accidently these drive can be formatted. So taking precaution is good. Only one pen drive with minimum 4 GB should be connected. Save all the data from the pen drive because it will be formatted in one of the following step.
After last step type “list disk” inside the command prompt and hit “ENTER”. (Fig.6)
This will show all disk connected to the system like DISK 0, Disk 1, and so on with “Status”, “Size” , “Free” etc.. We can recognize the pen drive with size. Disk 0 will be the system disk in which the windows OS is installed. In this tutorial Disk 1 is the pen drive (3855MB=4GB). This pen drive is going to be a bootable pen drive.
Type “select disk 1” inside the command prompt and hit “ENTER”. It will select the disk 1 (pen drive) for all coming steps. (Fig.7)
Type “clean” and hit “ENTER”. It will erase all the data from the pen drive. (Fig.8)
Type “create partition primary” and hit “ENTER”. It will create a primary partition in pen drive. (Fig.9)
Type “select partition 1” and hit “ENTER”. It will select the partition created in the last step. (Fig.10)
Type “format=fs ntfs quick” and hit “ENTER”. It will format the pen drive quickly with NTFS file type. (Fig.11)
Type “active” and hit “ENTER”. It will make partition as active for booting after restarting the computer. If this is step is missed then computer will not boot from the pen drive. (Fig.12)
Type “exit ” and hit “ENTER” to close the diskpart and close the command prompt window. (Fig.13)
Now the pen drive has become bootable. Now all the files from root of Windows operating system setup DVD or ISO has to copy inside the pen drive root.
So open the Windows setup file from DVD or ISO and copy all file by selecting with “Ctrl+A” and paste it inside the pen drive’s root folder as shown in the figure. (Fig.14)
After complete copy, the pen drive will be a bootable for Windows 7 and Windows 8 OS completely. You just need to“Restart” your computer. “Restart” your computer. When BIOS screen appears then press “F12” key. It will show the options to boot from CD/DVD drive, hard disk and pen drive. Just scroll down to pen drive and hit “Enter”. Your system will boot from pen drive. Now you can install windows OS.
That’s it.
Tuesday, 18 March 2014
SET PASSWORK ON ANY SOFTWARE
Hi i am chandan singh and this is my post so keep reading and give me some comments.....................
First of all download a software named Password Door to your pc [Download: 594.85 KB]
STEP 2:
Now install it to your pc, while installing , it will ask you to enter a password which will be used to open the password protected softwares.
Now install it to your pc, while installing , it will ask you to enter a password which will be used to open the password protected softwares.
STEP 3:
Now open Password Door with the help of password which you have entered while installing
Now open Password Door with the help of password which you have entered while installing
STEP 4:
Now You’ll see a list of all program on which you can set password.
Now You’ll see a list of all program on which you can set password.
Select the app from the list and make it password protect.
Now whenever you or any other user open password protected app, app will ask for the password. if you know the password only then you can access the application.
CONVERT WEB PAGE INTO PDF(PORTABLE DOCUMENT FORMAT)
Hi i m chandan singh and this is my post ....
You can visit BullZip.com for more information about the software.
Here the direct link to BullZip downloads page: Downloads
You can visit BullZip.com for more information about the software.
Here the direct link to BullZip downloads page: Downloads
- To get started, first follow the link above and download Free Pdf Printer from BullZip, then install it to your computer.
- Once you're done, you might need to close the program (or the web browser) which you're currently viewing the document. This helps refreshing the list of available printers on your computer.
- Once you get back to the document you want to convert, perform the same steps are you print out the document, i.e. File > Print ...
- When you see the Print window pop-up, select "Bullzip PDF Printer" under "Printers", then click "OK".
- BullZip PDF Printer will then start to analyze your document and display a new pop-up window, where you can direct it to the location you want to save the pdf file.
- Follow the pop-up windows and.. hola! The PDF document is created!
Subscribe to:
Posts (Atom)